Turfgrass Seed

Custom Mixtures

Pre-formulated Mixes

Native Grasses

Wildflowers

Forage Grasses

Forage Legumes

Brassica Legumes

Pasture Mixtures

Fertilizers

Hydro Mulch

Tackifiers

Straw Blankets

Futerra Blankets

Additives

Amendments

Bonded Fiber Matrix

Round Up

Silt Fence

Straw Wattles

Excelsior Blankets

Sod Staples

NEW!

Flood Control/

Spilll Containment

A specially designed ditch check that is  light weight, reusable and easy to install. It has a sediment filter and an outlet that allows you to control discharge flow. Either let it flow into a dewatering bag to catch any addition sediment that my get through the first filter. Or you can hook it to a hose to pump water around or off your job. Pumping around your job  means you only need one ditch check. As opposed to stair-stepping the ditch checks.  It is easy to remove.

Just say “No” to sandbags. Sandbags are back breakers that take a lot of time, labor and money. Water bladders deploy quickly and easily. After the flood threat passes you simply just drain the water, roll them up, and store them away until needed again. In just five minutes you can fill one 24” high x 20’ long water bladder that weighs up to 3,500 pounds when filled. The large commercial bladders come in 20”, 24”, 30” and 36” diameter with a 2” fill port. 

You can hold down tarps for erosion control, covering stock piles of soil, swimming pools, awnings, tents, plant material to protect it from frost, roof leaks, cars, campers, boats, hay bales, feed piles. Anything you can think of that requires portable weight. We have special clips that attach to any tarp to the water bladders quickly and easily. It will hold securely in place. When done simply drain and store.

Municipalities use water bladders to divert water off roadways into storm drains when blowing out their fire hydrants. They also keep them on hand and ready to deploy in just minutes when a water main breaks. They help to control property damage caused by sudden unexpected flooding. They are light weight, fill in minutes and easy to store. They can help reduce liability insurance and work related injuries.

Our XR-5 spill containment bladders deploy quickly. Just put in place and fill with water. They have been tested by totally submersing them in Diesel Fuel, Ohio Crude Oil, Hydraulic Fluid (Petroleum based), Naphtha, Concentrated Ammonia Hydroxide, Clorox, Turpentine, Sea Water, Mineral Spirits, Antifreeze, 50% Phosphoric Acid, 50% Hydrochloric Acid, 50% Sulfuric Acid, 60% Sodium Hydroxide, Kerosene, Raw Linseed Oil, JP-4 Jet Fuel, SAE-30 Oil and Methyl Alcohol. After 28 days at room temperature there was little to no effect on the XR-5 product. 

                                            *Bladder Capacity Table

Diameter Size           Gallons/Foot          Gallons /20 Feet    Pounds/20 Feet

         8”                              1.47                          29                            226 lbs.

        13”                              5.8                          116                            900 lbs.

        20”                              16                           320                         2,496 lbs.

        24”                              23                           460                         3,588 lbs.

        30”                              36                           720                         5,616 lbs.

        36”                              49                           980                         7,644 lbs.

             *Actual gallons and weights may very slightly depending method of filling.